 (3) 64 Cavities; linerless 28-mm closure injection molds for use on  PCO, 1716 bottle finishes. Can be used for applications such as  water and other liquids or beverages (aseptic, cold and hot filled)  using non-pressurized containers.


 (2) 64 Cavities; 28-mm closure injection molds for use on PCO,1716 bottle finishes. Can be used for lined closures for applications  such as carbonated soft drinks and other liquid or beverages
(aseptic, cold and hot-filled) using Pressurized containers.


 32 Cavities; linerless 38-mm closure injection molds for use on  liquids or beverages using non-pressurized containers.

Applications have included motor oil, liquids and beverages (aseptic  and cold filled).


 (2) 16 Cavities; linerless 38-mm closure injection molds for use on  liquids or beverages using non-pressurized containers.

 

Applications have included motor oil, liquids and beverages (aseptic  and cold filled).

Numerous 1 and 2 Cavities unit tools for prototyping in various  sizes, including 28-mm, 38-mm, 43-mm, 63-mm, etc.

Numerous Cores and Cavities for linerless and lined 28-mm closure  Injection Molds.
‘ALL MOLDS HAVE HUSKY HOT RUNNER SYSTEM’


 SACMI CURLER/SLITTER

Main Control Panel; Type, BTA 002, 480, 15A,  60 hz, 45° C, 40 KA, I Max 7A, cod. BTV 900 86
802, N 10003608  Sacmi 8” Curler; Type, VTC 102, 18 Curler cures,
s/n 10003737, New 2002

Control Panel “B” Curler; TVC 102, 480, 60 hz,  17A 45° C, 40 KA, I max 7A, Cud. BTV 900 86  802, N 10003737

Control Panel “B” Hopper; 480, 60 hz, 2A t. 45° C,  40 KA I max, 1A Code CAA 003 86 808, type  EL1500

Control Panel “B” Orinetator; 480, 60 hz, 2A 45° C,  40 KA, Imax 1A Cod. CAA 003 86-815 Type AC 
10, Orientator Sacmi CE, manufacturer PESCE AL,  type AC 10, s/n 4824, New 2002

Control Panel “A” Curler; TVC 102, 18 curler cores,
s/n 10003736, New 2002

Control Panel “A” Curler; TVC 102, 480, 60 hz, 17A, 45 degree C, 40 KA, Imax 7A, Cod. BTV
900 86 802, s/n 10003736 Com.

Control Panel “A” Hopper; 480, 60 hz, 2A t. 45° C40 KA Imax, 1A Code CAA 003 86 808, type
EL1500 Control Panel “A” Orinetator; 480, 60 hz, 2A 45°  C, 40 KA, Imax 1A Cod. CAA 003 86-815 Type
AC 10, Orientator, type A-C10, New 2002

 

Control Panel; V-110, Hz 60, In: 2, Type PMD 200  Orientator; Sacmi type ATV 10, New 1998
Power Panel; COD PMD 200 86 807, 24 capacity x3
Power Panel; COD PMD 200 86 806,
24 capacity x3, 1) Pellets, 2) Liner, 3) Inserter



 CURLERS

Control Panel “A” Curler; TVC 102, 18 curler cores,  s/n 10003736, New 2002

Control Panel “A” Curler; TVC 102, 480, 60 hz,  17A, 45 degree C, 40 KA, Imax 7A, Cod. BTV
900 86 802, s/n 10003736 Com.


 VERTICALMILL

2HP Bridgeport Vertical Mill, 9” x 42” table,  vari-speed, P.F., s/n 247062  Grinders  10” x 18” Boyar Schultz 2A Hyd. Surface  Grinder, wheel dresser, 1 HP, coolant,  s/n 175128  10” x 20” Jones & Shipman Univ. Cyl. Grinder,  coolant, internal attachment, s/n 50145  12"x36" Model URB 1000 A, Kikurda,  Incremental Down Feed, s/n: 7456

 MIXER

Micro Conomix Model MCMX3, s/n 9A0176


 ENVIROMENTAL CHAMBERS